DIGITAL CURRENT CLAMP 1000A AC/DC TRUE RMS + INRUSH CURRENT MEASUREMENT, LOZ, VFC, CONTACTLESS VOLTAGE TESTER AND PHASE TESTER

• Illuminated digital display with analog graphics
• Digital display 13 mm
• Automatic and manual range selection
• Memory for minimum and maximum values
• Automatic shutdown
• Diode test
• LED flashlight
• True RMS (Measurement of the true effective value)
• Backlit
• Storing a current value (Data Hold)
• Single-pole phase check with audible alarm
• Color display
• VFD-Funktion zur Messung echter Effektivwerte an Frequenzumrichtern
• Low input impedance (LoZ) to suppress parasitic voltages
• 2-level non-contact voltage detector (NCV)
• Inrush current measurement (INRUSH current)

Technical data:

• DC voltage (V=): 0.1mV – 1000V
• AC voltage (V~): 0.1mV – 750V
• DC current (A=): 0.01A – 1000A
• Alternating current AC (A~): 0.01A – 1000A
• Resistance (Ω): 0.1Ω – 60MΩ
• Continuity check: <30Ω
• Fill factor in % (PBM): 1 – 99 %
• Capacitance (F): 0.001nF – 10mF
• Temperature (°C) (sensor type K): -20°C – +1000°C
• Ambient temperature (°C): 0°C – 40°C
• Accuracy (%): 0.5% – 5%
• Pliers opening: ⌀ 40 mm
• Device dimensions: 259x74x35 mm
• Weight (gross/net): 433 / 265g
• Battery(ies) required: 3 x 1.5V AAA
• Measurement Category (CAT): CAT III 1000V / CAT IV 600V

The PAN 1000AD is a professional True RMS clamp meter for precise measurements in electrical installations and maintenance technology. With its wide range of functions, the device is ideal for demanding tasks in trade and industry. It reliably measures DC and AC voltages up to 1000 V, currents up to 1000 A, as well as resistances, frequencies, capacitances and temperatures.

The integrated inrush current measurement as well as the non-contact voltage test (NCV) and single-pole phase test enable quick and safe preliminary tests. Thanks to True RMS technology, the PAN 1000AD provides precise values ​​even with distorted signals – for example in switching power supplies or motor drives.

The device has practical functions such as automatic range selection, data hold, min./max. value display, relative value measurement and illuminated display. The built-in LED flashlight ensures good visibility in poorly lit areas. The controls are clear and suitable for professional use.

High-quality test leads, a type K temperature sensor and an instruction manual are included. The PAN 1000AD meets the requirements of measurement categories CAT IV (600 V) and CAT III (1000 V) and is therefore also suitable for use in main distribution boards and industrial installations.