SOCKET TESTER + 30 MA RCD TESTER

_x000D_
• Type 2 plug: Direct connection to AC charging stations in accordance with IEC 62196-2.

_x000D_

• 4 mm safety sockets

_x000D_

• Simulation of vehicle charging states (A–D):

_x000D_

• Adjustable charging states in accordance with IEC 61851-1:
  State A: No vehicle connected
  State B: Vehicle connected but not ready to charge
  State C: Vehicle connected and ready to charge
  State D: Vehicle connected with a ventilation request

_x000D_

• Charging current simulation: Adjustable currents: 13 A, 20 A, 32 A, 63 A

_x000D_

• 3 phase indicator LEDs: Indication of voltage presence on phases L1, L2 and L3.

_x000D_

• Earth test – Earth fault simulation: Simulates a missing protective conductor to test the charging station’s safety response.

_x000D_

• Communication test – Short-circuit simulation: Simulates a short circuit on the control pilot (CP) line to check fault detection.

_x000D_

• Schuko socket for external loads (max. 10 A): For connecting additional loads during the test procedure.

_x000D_

• Dust-resistant and water-resistant (IP54)

_x000D_

_x000D_

PAN Wallbox Tester is a versatile test device for checking electric vehicle charging stations with Type 2 plugs. It enables precise simulation of various charging states and currents in accordance with IEC 61851-1 and IEC 62196-2. The device is ideal for technicians and installers who want to reliably test charging stations and ensure their safety.

_x000D_

PAN Wallbox Tester can simulate various vehicle charging states, including „No vehicle connected“ (State A), „Vehicle connected but not ready to charge“ (State B), „Vehicle connected and ready to charge“ (State C) and „Vehicle connected with a ventilation request“ (State D). Various charging currents (13 A, 20 A, 32 A, 63 A) can also be set to test the charging station’s response to different loads.

_x000D_

The device has an earth test to simulate a missing protective conductor and a communication test to simulate a short circuit on the control pilot (CP) line. A Schuko socket (max. 10 A) allows external loads to be connected during the test procedure. Three LEDs indicate voltage presence on phases L1, L2 and L3, providing quick visual verification.

_x000D_

PAN Wallbox Tester is robustly constructed, protected against dust and splashing water (IP54), and therefore suitable for use in harsh conditions.